GE SECURITY SYSTEM - Models NX-4, NX-6, NX-8 and NX-8E

Key Features:
  • Flash Memory Microprocessor
  • Expanded Event Log
  • Early Open/Late Close Reporting
  • Programmable Loop Response
  • Accommodates Multiple User Codes from 8 Up to 240
  • Up to 8 True Partitions w/Separate Account Codes, Entry/Exit Delays and Feature Selections for Each Partition
  • Up to 512-Event History Log that Provides Date, Time, Event and User Number
  • Supports SIA and Contact ID Communication Formats
  • 2-Wire or 4-Wire Smoke Detector Compatibility
  • CP-01 2000 Compliant
  • Fire Alarm Verification for Greater False Alarm Immunity (NX-8E)
  • Dynamic Battery Test (NX-8E)
  • Standard RS-232 On-Board Interface (NX-8E)
Wired and wireless control panels provide advanced features and multiple zones of protection ideal for residential and light-commercial applications
The NetworX line of control panels represent a full-featured security system that uses advanced technology for burglary, fire and environmental detection. A highly flexible security option that is both easy to install and simple to use, NetworX control panels can accommodate smaller residential applications up to the most demanding commercial security needs. The series includes the NX-4, NX-6, NX-8 and NX-8E control panels.

NetworX Ethernet Module

Key Features:
  • Compatible control panels NX-4V2, NX-6V2, NX-8V2, NX-8, NX-8E
  • Operating power 12VDC supplied from the control panel
  • Current draw
  • 120mA during communication, 90mA standby
  • Operating temperature 32ºF~120ºF (0ºC~49ºC)
  • Dimensions 6.0 x 3.25 x 1.0 in. (152 x 83 x 25mm)
  • Shipping weight 1 lb. (454 g)
  • UL listings UL294 Access Control System Units
  • UL1610 Grade B and C Central-Station
  • Burglar Alarm Units
  • UL1635 Digital Alarm Communicator System Units
  • UL609 Local Burglar Alarm Units and Systems
  • UL3765 Police-Station-Connected
  • Burglar Alarm Units and Systems

PDF: Networx catalog.pdf

The NetworX Ethernet Module brings new functionality to the world of controls with Ethernet connectivity to your central station. Working in conjunction with the Osborne-Hoffman Network Receiver, a direct pipe is established into your current automation.
Network ethernet module.png
Backwards Compatible to All NetworX Controls and Resides in a 6-inch Slot in the Control Cabinet
Provides 10/100BASE-TX Ethernet Connectivity with TCP/IP
On-site or Remote-initiated Download Using DL900 Software
Code Updates for NX-590NE Can be Downloaded and Flashed into Modules Over the Network
Uses SIA or Contact ID Reporting Formats
Installer-selectable Polling Time for Full Supervision
Low Current Draw of 90mA in Standby and 120mA During Communication at 12VDC from NetworX Control Panel
Small Bandwidth Used w/Typical Message (20 bytes)

PowerSeries Neo – The Next Generation in Security Systems

PowerSeries Neo captures the flexibility of a modular, hardwired system with the simplicity of a wide range of wireless devices and peripherals, resulting in a ground-breakingly comprehensive and versatile hybrid system suited for small business structures through to large-scale commercial applications

PDF: 30001878_HS2_Control_Panel_Spec_w_Alarm-com_en_draft2_cs

PDF: 30001547_HS2-Series_Keypads_Spec_Eng

PDF: Power G Brochures

Key Features:
  • 16 to 128 zone panel configurations
  • PowerG – robust, industry leading commercial grade wireless
  • Simple partition management using Global keypads
  • Compatible with home automation solutions with built-in Z-Wave capabilities through dual-path LTE/Internet and HSPA (3G)/Internet communicators
  • Intuitive, quick installation
  • User-friendly interfaces
  • Visual alarm verification
  • 2-way audio alarm verification via phone or cellular
  • Alternate Communications via Cellular and IP Local and Remote Downloading
  • Cost efficiencies through advanced system software
  • 128 bit AES encryption (wireless, communicator & BUS)
  • Remote firmware upgrade (panel/keypads/transceiver)

PARADOX SECURITY SYSTEM - SP4000 / SP5500 / SP6000 / SP65 / SP7000 Expandable to 32-Zone Control Panels

Key Features:
Supports StayD mode
4-wire expansion bus
Expandable to 32 zones
Expandable to 16 PGMs
2 Partitions
32 User Codes
Supports PCS Series
Supports IP100 Internet Module
Supports VDMP3 Plug-in voice dialer
Supports REM3 hand-held remote keypad – require RTX3 V1.31 or higher (SP4000 – One way only)
Supports iParadox app
In-field firmware upgradeable via a 307USB
– WinLoad for SP5500/SP6000/SP7000
– InField Firmware Upgrade Software for SP4000/SP65
Menu-driven programming for the Installer, Master and Maintenance codes
Multiple phone numbers: 3 for monitoring station, 5 for personal dialing and 1 for pager reporting (SP65: via PCS200 only – GSM reporting)
Patented 2 opto coupler dialer circuit – the most reliable dialer in the industry – US Patents 5751803, RE39406 (N/A with the SP65)
Automatic Daylight Savings Time feature
Push button software reset (reset to default values and restart)
Direct connect at 9.6k baud
– WinLoad for SP5500/SP6000/SP7000
– Babyware for SP4000/SP65
256 events buffered
Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes
EN50131 grade 2